Specialized Communications Equipment Manufacturer
1-587-351-1900
Teletics Communications Equipment
Manufacturer of Specialized Communications Equipment
The WRE2710-S is designed for commercial machine-to-machine (M2M) applications. The M2M cell signal booster maximizes connectivity; data comms & signal strength of telemetry systems that are unable to connect or maintain connected to the Carriers cellular network.
For telemetry systems located within inner metro areas or beyond the fringe of the network, the WRE2710-S is vital for real-time data collections & remote system monitoring.

 

    • Network compatible: 2G, 3G, GSM, GPRS, CDMA, HSPA, WCDMA
    • Patented Passive Bypass Technology
    • Patented Auto Gain & Oscillation Control
    • Connects in-line with any cellular router, modem module or M2M system
    • All components needed for DIY installation included in kit
    • Boosts both cellular & PCS signals for all U.S. & Canadian cell carriers
    • FCC & Industry Canada Certified
  • WRE2710-S M2M Kit Includes:

    • 15dB gain Cellular Signal Amplifier
    • 2dBi Mag-Mount Antenna
    • AC Power Supply Cable
    • DC Power Pigtail Cable
    • SMA (M) to SMA (M) Jumper Cable
    • Owners Manual

     

    • Network compatible: 2G, 3G, GSM, GPRS, CDMA, HSPA, WCDMA
    • Frequency: 824-894 MHz / 1850-1900 MHz
    • Max RF output power: 27 dBm
    • Max RF input power: -20dBm
    • Nominal RF gain: 15 dB idle
    • Current draw @ 12V: 250 mA (idle) – 1 A (max)
    • Input voltage: +8.0 to 36.0V
    • Impedance: 50 Ohms
    • Dimensions: 4.9″ L x 2.7″ W x 0.92″ H
    • Weight: 226g / 0.5lb
    • Connector: SMA (F)
    • Operating temperature: -20C to +60C
    • Storage temperature: -30C to +70C
    • Relative humidity: 5% to 90% storage

    This is a consumer device. Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You must operate this device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 20 cm (8 inches) from any person. You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

  • ClearRF datasheet
    Download the ClearRF WRE2710 User Manual