Specialized Communications Equipment Manufacturer
1-587-351-1900
Teletics Communications Equipment
Manufacturer of Specialized Communications Equipment
The WRE5500-S increases 4G signal strength and extends signal range of any cellular-based router, modem, alarm panel to communicate to and from the cell tower, which is vital for real-time data transfers and remote access/control of telemetry devices in weak network signal areas. The WRE5500-S is designed with fail-safe technologies and superior performance specifically for commercial/ industrial machine-to-machine (M2M) applications.

 

    • Boosts 4G, 3G & 2G For All North American Carriers
    • 5-Band Bi-Directional Plug & Play Cellular Amplifier
    • Patented Passive RF Bypass Failover
    • Patented Auto Gain & Oscillation Control
    • Power Input Ranges +8.0 – 32.0 VDC
    • RF & Power Over Coax – Optional Feature
  • WRE5500-S M2M Kit Includes:

    • 15dB gain Cellular Signal Amplifier
    • 2dBi Mag-Mount Antenna
    • AC Power Supply Cable
    • DC Power Pigtail Cable
    • SMA (M) to SMA (M) Jumper Cable
    • Owners Manual

     

  • Electrical

    • Network compatible: 4G, LTE, w/ 3g & 2G fall-back; GSM, GPRS, CDMA, HSPA, WCDMA
    • Frequencies: Band 2: 1900 MHz, Band 4: 1700/2100 MHz, Band 5: 850 MHz, Band 13: 700 MHz, Band 17: 700 MHz
    • Rated Uplink Max Output Power: 27dBm
    • Rated Downlink Max Output Power: -20dBm
    • Nominal RF gain: 15 dB idle
    • Current draw @ 12V: 275 mA (idle) – 1 A (max)
    • Input Power Requirement: 8.0 to 32.0 VDC (negative ground)
    • Input/output Impedance: 50 Ohms

    Mechanical

    • Dimensions: L. 4.9” x W. 2.7” x H. 0.92” / 125mm x 68mm x 23.5mm
    • Weight: 226g / 0.5lb
    • Connector: SMA (F)

    Environmental

    • Operating temperature: -40°C to +70°C / -40°F to +158°F
    • Storage temperature: -40°C to +85°C / -40°F to +185°F
    • Relative humidity Storage: 5% to 90%

    This is a consumer device. Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You must operate this device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 20 cm (8 inches) from any person. You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

  • Download the WRE5500-S User_Manual